How To Bypass Speed Limiter on Trucks

Speed limiters are devices that prevent a vehicle from exceeding a certain speed. They are common in trucks, which are often required to adhere to lower speed limits than other vehicles on the road. While speed limiters can help improve safety, they can also be a source of frustration for truck drivers who want to go faster.

Luckily, there are a few ways to bypass a speed limiter. One option is to disconnect the device entirely. This can be done by locating the speed limiter’s sensor and disconnecting the wire that leads to it. Once you have located the sensor, you will need a wire cutter to sever the connection.

Another option is to install a speed limiter bypass module. This module tricks the speed limiter into thinking that the vehicle is going slower than it actually is. As a result, the speed limit can be increased. Installing a bypass module is generally a more expensive option than simply disconnecting the speed limiter. However, it is also a more permanent solution. If you choose to install a bypass module, be sure to purchase one that is compatible with your vehicle’s make and model.

Finally, some drivers choose to replace the entire speed limiter with a higher-rated one. Whichever method you choose, bypassing a speed limiter is relatively easy and can help you quickly get where you’re going.


Why Do Trucks Have Lower Speed Limit?

Trucks have lower speed limits for a variety of reasons. One reason is that trucks are much larger and heavier than passenger vehicles, and as a result, they take longer to stop. This is especially true if the truck is carrying a heavy load, making it even more difficult to stop quickly.

In addition, trucks have large blind spots, making it more difficult for the driver to see other vehicles around them. This means that if a truck is going too fast, it might not be able to stop in time if another vehicle suddenly moves into its path. Trucks also tend to experience more engine wear and tear at higher speeds, leading to expensive repairs down the road. For all these reasons, trucks must stick to lower speed limits to keep everyone on the road safe.

How Fast Can Trucks Go?

When it comes to speed, trucks fall somewhere between cars and trains. Using the truck speed limiter, you will know that the average car can reach around 60 miles per hour, while trucks max out at around 55 miles per hour. This may not seem like a big difference, but it can significantly impact travel time.

For example, a truck traveling from Los Angeles to San Francisco will take around 12 hours to make the trip, while a train can make the same journey in just under 10 hours. Of course, many factors contribute to travel time, including traffic and weather conditions. But when all things are equal, trucks can’t compete with trains and even most high-end cars when it comes to speed.

How Can I Increase the Speed of My Truck?

Sometimes, the need to speed up your truck comes down to basic physics. If you want to go faster, you need more power. One way to increase the speed of your truck is by upgrading the engine. This will provide more power and allow you to reach higher speeds. To upgrade your truck’s engine, you will need to purchase a new engine and have it installed by a qualified mechanic.

Another way to make your truck go faster is by installing a bigger turbocharger. A turbocharger helps force more air into the engine, allowing more power. Installing a bigger turbocharger is generally a more expensive option than upgrading the engine. However, it is also a more effective way to increase speed. If you want to install a bigger turbocharger, you must purchase the appropriate size for your truck and have it installed by a qualified mechanic.

If you want to go even faster, you can install a nitrous oxide system. This will provide a temporary speed boost by injecting a nitrogen-oxygen mixture into the engine. However, nitrous oxide systems are generally only used for racing and are not recommended for everyday driving.

You can also learn how to adjust truck speed limiter so that it’s in sync with the road’s speed limits. Doing this will help you avoid costly speeding tickets and save on fuel consumption.

No matter what method you choose, increasing the speed of your truck can be a fun and rewarding experience. Just be sure to drive safely and obey all speed limits.

Can You Get a Speed Limiter Removed?

How to remove speed limiter on international truck is a question we get often, and there are a few ways to go about it. The most common way is to purchase a speed limiter removal kit, allowing you to override the factory settings and go as fast as you want. In some cases, you may be able to have a speed limiter removed from your truck. This is typically only possible if the truck’s manufacturer installed the speed limiter and is not required by law. If you want to have a speed limiter removed, you must take your truck to a qualified mechanic. The mechanic will be able to assess whether or not the speed limiter can be safely removed.

However, you have to ensure that you are still following all speed limits even if you don’t have a speed limiter. Just because you can go faster doesn’t mean that you should. Obeying the speed limit is always the best policy to avoid getting pulled over or into an accident.

Will Speed Limiters Be Mandatory?

The debate over speed limiters is ongoing, with advocates on both sides of the issue. Those in favor of mandatory speed limiters argue that they would help to reduce accidents and save lives. On the other hand, opponents argue that speed limiters would be difficult to enforce and would not address the underlying cause of accidents. There is no consensus on whether or not to make speed limiters mandatory, but the debate is sure to continue until a decision is reached.

However, if you weigh the pros and cons, it’s easy to see that speed limiters offer many benefits. And, as more and more countries adopt speed limiters, it’s likely that they will eventually become mandatory in the United States. In the meantime, you can choose to install a speed limiter on your truck if you feel it would be beneficial.


Speed limiters exist for a reason: to keep people safe. But sometimes, you need to go faster than the speed limit allows. If this is the case, bypassing the speed limiter is the best option. There are a few different ways to do this, but the most effective method is to install a bigger turbocharger. Just drive safely and obey all speed limits, even if you don’t have a speed limiter.

About the author, Laurence Perkins

Laurence Perkins is the passionate car enthusiast behind the blog My Auto Machine. With over a decade of experience in the automotive industry, Perkins has knowledge and experience with a wide range of car makes and models. His particular interests lie in performance and modification, and his blog covers these topics in-depth. In addition to his own blog, Perkins is a respected voice in the automotive community and writes for various automotive publications. His insights and opinions on cars are highly sought-after.