Regarding landscaping, gravel is popular due to its versatility and affordability. It comes in various colors and can create several different looks for your yard. But how much does a dump truckload of gravel cost?
Contents
Gravel Cost
Gravel is an affordable construction material with many uses, from driveways to drainage. The gravel cost depends on the rock type, volume, and travel distance. It typically ranges from $10 to $50 per ton, $15 to $75 per yard, $1 to $3 per square foot, or $1,350 per truckload, including delivery up to 10 miles.
Uses of Gravel
Gravel is an essential component in many construction projects. Its low cost and easy installation make it a popular choice for homeowners and contractors. It can be used to pave a new driveway or improve drainage in your yard.
How Many Tons of Gravel Are in a Dump Truck Load?
The amount of gravel a dump truck can carry depends on its size. Typically, larger dump trucks can hold about 28,000 pounds or about 14 tons, while smaller dump trucks can transport around 13,000 to 15,000 pounds or 6.5 to 7.5 tons. The weight of the load may also vary depending on the type of gravel being transported. The load’s size and weight will determine a dump truck’s capacity.
Cheapest Gravel for a Driveway
The cheapest gravel options for driveways are crusher run, crushed shells, crushed concrete, slate chips, recycled asphalt, and pea gravel. When purchased in bulk from a quarry, these all cost between $15 and $30 per yard or less than $1 per square foot. A crusher run is the most affordable option, followed by crushed shells. Crushed concrete is the next most affordable option, followed by slate chips. Recycled asphalt and pea gravel are the most expensive options. However, all of these options are much cheaper than purchasing new gravel.
How Far Will 15 Ton Gravel Cover?
Fifteen tons of gravel are equivalent to 11.1 cubic yards of gravel, which would cover around 1620 square feet or 180 square yards if you’re laying a standard 2-inch layer of gravel. For a larger area, like 150 square meters, you’ll need to use a slightly deeper layer of gravel. Ultimately, the amount of coverage you’ll need will depend on the depth of the layer and the size of the area you’re looking to cover.
How Far Will a Load of Gravel Go?
The size of the gravel significantly impacts how far it will go. Using a depth of 2 inches as a guide, 1/4 to 1/2 inch gravel will cover 100 square feet per ton, while 1/2 to 1-inch gravel will cover 90 square feet per ton. 1 1/2 to 2 inches of gravel will only cover 80 square feet per ton. When choosing your gravel, be sure to take this into account.
How Many Tons of Gravel Do I Need for a 100-Foot Driveway?
For a standard 100-foot driveway, you’ll need about 15.43 tons of gravel, giving you a layer of gravel around 4 inches deep. If you’re planning on a 150-foot driveway, you’ll need around 23.15 tons of gravel; for a 200-foot driveway, you’ll need approximately 30.86 tons. These are estimates, and your actual needs may vary depending on the depth of your driveway and the type of gravel you choose.
What Makes Concrete Trucks So Special?
Concrete trucks are a vital component of any construction site. Their unique design ensures that concrete is always fresh and ready to use.
Rotating Drum for Continuous Mixing
One of the most notable features of a concrete truck is its rotating drum. The drum allows for continuous mixing of the concrete as it is transported, ensuring it remains fresh and workable. The drum is typically made of heavy-duty steel. It can rotate in both directions to thoroughly mix the concrete.
Designed to Prevent Spillage
Another critical feature of a concrete truck is its design, intended to prevent the concrete from spilling while it is in motion. The drum is securely attached to the truck’s chassis, which is built to withstand the weight of a full load of concrete. The truck’s brakes are designed to stop the vehicle safely, even when fully loaded.
Appreciating the Engineering
It’s easy to take concrete trucks for granted. Still, the engineering that goes into designing and building these machines is truly remarkable. Every component, from the rotating drum to the chassis and brakes, is carefully crafted to ensure the truck can operate safely and efficiently. So the next time you see a concrete truck on the road, take a moment to appreciate all the engineering that goes into making these powerful machines.
Conclusion
Gravel may be a popular choice for construction projects. Still, concrete trucks play a critical role in building safe, durable, and functional structures. Their unique features, such as the rotating drum and spill-proof design, make them unique. Understanding these features can help us appreciate the engineering that goes into creating these powerful machines.
