Sometimes you need to transport your motorcycle but don’t have access to a trailer. Perhaps you’re moving and need to get your bike to your new home, or maybe you’re going on a cross-country road trip and want to save money by avoiding the cost of shipping or renting a trailer. Whatever the reason, if you find yourself in this situation, don’t despair—loading a motorcycle into the bed of a pickup truck is relatively simple, as long as you have a few basic supplies and follow some key steps.
Before you get started, you’ll need to gather a few things:
- A set of ramps (preferably with rubber or plastic surfaces to protect your bike’s tires)
- A tie-down system (consisting of straps, ratchet lashings, or both)
- Something to use as a chock (a block of wood or metal that will prevent the bike from rolling while it’s in the truck)
Once you have everything you need, follow these steps to load your motorcycle:
- Position the ramps at the back of the truck, making sure they are securely in place.
- Drive the bike up the ramps and into the truck bed.
- If using straps, attach them to the front and rear of the motorcycle, tightening them until the bike is secure.
- If using ratchet lashings, thread them through the appropriate loops on your bike and ratchet them tight.
- Place the chock in front or behind the tires to prevent the motorcycle from rolling.
- Double-check your tie-downs to ensure they are secure, and you’re ready to go!
There is more best way to load motorcycle on truck. However, in reality, it may seem daunting. With some preparation and care, it’s actually quite simple. Just be sure to take your time, and don’t try to rush the process.
Contents
How Do You Put A Motorcycle In A Truck Without Ramps?
Getting your motorcycle into the back of a truck can be tricky, especially if you don’t have a ramp. However, there are a few ways to do it without too much trouble. One option is to find a hill or driveway to which you can back your truck up. Then, simply ride your bike up the incline and into the truck’s bed.
Another possibility is to use a grocery store loading dock. If you can position your truck close enough, you should be able to ride your motorcycle right on and then load it into the truck. With a little creativity, even without any ramp to load motorcycle in truck, it would be possible!
How Do You Strap A Motorcycle In The Back Of A Truck?
Once you have your motorcycle in the back of the truck, you’ll need to strap it down, so it doesn’t move around while you’re driving. The best way to help you strapping a motorcycle in a truck is with a tie-down system that includes straps and ratchet lashings. First, attach the straps to the front and rear of the motorcycle.
Then, thread the ratchet lashings through the appropriate loops on your bike and ratchet them tight. Finally, place a chock in front or behind the tires to prevent the motorcycle from rolling. With all of these elements in place, your motorcycle will be securely strapped down and ready for transport.
Will My Motorcycle Fit In My Truck?
If you’re not sure whether your motorcycle will fit in your truck, there are a few things you can do to find out. First, measure the length and width of your motorcycle.
Then, compare these dimensions to the length and width of your truck bed. If the bike is smaller than the bed, it should fit without any problems. However, if the bike is larger than the bed, you may need to remove some of the motorcycle’s parts before it fits.
You should also take into account the height of your truck bed and the height of your motorcycle. If the truck bed is too tall for the bike, you may need to lower the suspension or remove the wheels before loading it.
What Is The Best Way To Transport A Motorcycle?
The best way to transport a motorcycle is in an enclosed trailer. This will protect your bike from the elements and keep it safe while you’re driving. If you don’t have access to a trailer, the next best option is to strap the motorcycle down in the back of a truck.
Make sure you use a tie-down system that includes straps and ratchet lashings, and place a chock in front or behind the tires to prevent the motorcycle from rolling. With these precautions in place, your motorcycle will be securely transported to its destination. As time goes by, you’ll even master how to load a motorcycle into a truck by yourself.
How Do You Put A Non-running Motorcycle In A Truck?
If your motorcycle isn’t running, you’ll need to find a way to get it into the back of the truck. One option is to ask a friend or family member for help.
They can push the bike while you guide it into the truck bed. If you’re working alone, you can try rolling the motorcycle onto a piece of plywood.
Then, you can slide the plywood into the truck bed and strap the motorcycle down. With a little effort, you should be able to get your non-running motorcycle into the back of the truck.
How Do You Make A Motorcycle Loading Ramp?
If you don’t have a ramp and can’t find a hill or loading dock, you may need to make your own ramp. One option is to use two pieces of plywood that are each four feet long.
Place one piece of plywood on the ground and lean the other piece against the back of the truck. Then, simply ride your bike up the ramp and into the truck bed.
If you don’t have plywood, you can use two pieces of lumber that are each four feet long. Place one piece of lumber on the ground and lean the other piece against the back of the truck.
Then, nail the two pieces of lumber together to form a ramp. Now you can ride your bike up the ramp and into the truck bed.
With a little effort, you can load your motorcycle into a truck without any ramps! Just be sure to use a tie-down system to secure the bike, and place a chock in front or behind the tires to prevent it from rolling.
Conclusion
Loading a motorcycle into a truck can be tricky, especially if you’re working alone. But with a little planning and the right supplies, you can do it! Just be sure to use a tie-down system to secure the bike, and place a chock in front or behind the tires to prevent it from rolling. With these precautions in place, your motorcycle will be safely transported to its destination.
